FASTER SPEED TO TARGET WITH ROOM TO WORK WITH IRON SIGHTS AND NIGHT VISION.
Technical Specifications
Overview
The HWS EXPS3™ is an excellent choice for professionals. The EXPS3 offers true two eyes open shooting for fast target acquisition, night vision compatible settings, and a 7mm raised quick detach base for lower 1/3 iron sight co-witness.
Included in the box:
- HWS EXPS3™
- Quick-Start Guide
- Warranty Card
- CR123 Battery
- Protective Case
Night Vision Compatible
L X W X H
3.8" x 2.3" x 2.9" (96.5 x 58.4 x 73.7 mm)
Weight
11.2oz (317.5g)
Water Resistant
33ft. (10 m) depth
Mount
1" Weaver or MIL-STD-1913 rail
Windage & Elevation Adjustment
0.5 MOA per click
Brightness
20 daylight settings
10 additional settings for Gen I through III+ night vision devices
Power Source
1 x CR123 battery
Battery Life
1,000 continuous hours at nominal setting 12 at room temperature
Operating Temperature
-40°F to 140°F (-40°C to 60°C)
Country of Origin
Made in USA
HWS EXPS3 Performance Characteristics
EOTECH One Dot Reticle
Our most popular reticle offered, the 68 MOA ring with 1 MOA dot provides three usable aiming points. The aiming points above are based on the following load: .223 cal. 62 gr. 2,900 vel. When using other loads and calibers, the operator will have to establish the ranges associated with the aiming points. When using a shotgun, the 68 MOA ring can be used to represent shot patterns but will vary based on choke and shell selection. For ordering this reticle, the model codes will end in -0.
Brightness Options
The EXPS3™ HWS offers multiple brightness settings with both Standard and Night Vision modes offering quick adjustability to accommodate any shooting situation.
